Selector Lever Knob

Selector Lever Knob
This is a "Trustmark Authoring Standards (TAS) Repair Procedure"
- TAS style procedures can be identified by steps that have no accompanying step text and the magenta color of the electrical connectors and fasteners such as nuts, bolts, clamps or clips.
- TAS removal and installation procedures use a sequence of color illustrations to indicate the order to be followed when removing/disassembling or installing/assembling a component.
- Many of the TAS procedures will have the installation information within the removal steps.
- The TAS color illustrations use a variety of symbols to indicate important details of the procedures. It is important to understand these symbols in order to properly used the TAS procedures.
Refer to How to Use TAS Procedures and TAS Symbol Glossary at Vehicle | Description and Operation for additional information on these TAS procedures.
For additional information, refer to How to Use TAS Procedures

Removal
1 Secure the gearshift lever boot, below the locking ring using either an elastic band or cable tie.




2 Rotate the boot and locking ring.





WARNING: The selector lever knob will be released suddenly, keep face clear during removal.

Installation

CAUTION: Make sure that the selector lever and the gearshift mechanism are in the park (P) position.
1 To install, reverse the removal procedure.