C-Pillar Upper Trim Panel

C-Pillar Upper Trim Panel

Removal
1 Fold down the rear seat backrest.
2 Release the door aperture weatherstrip.
3 Release the safety belt lower anchor.
- Remove and discard the Torx bolt.
4 Release the upper trim access cover.




5 Remove the C-pillar upper trim panel.
- Remove and discard the Torx screw.
- Release the 4 clips.
- Release the safety belt from the seat.




6
NOTE:
Do not disassemble further if the component is removed for access only.
Remove the 4 clips from the C-pillar upper trim panel.

Installation
1 Install the clips to the C-pillar upper trim panel.
2 Install the C-pillar upper trim panel.
- Attach the safety belt.
- Secure with the clips.
- Install a new Torx screw and tighten to 3 Nm (2 lb.ft).
3 Install the upper trim access cover.
4 Install the safety belt lower anchor.
- Tighten the new Torx bolt to 40 Nm (30 lb.ft).
5 Install the door aperture weatherstrip.
6 Return the seat backrest to the upright position.