D-Pillar Trim Panel
D-Pillar Trim Panel
Removal
1 Remove the C-pillar lower trim panel. For additional information, refer to C-Pillar Lower Trim Panel C-Pillar Lower Trim Panel
2 Vehicles fitted with 7 seats: Release the seat belt.
- Remove and discard the bolt.
3 Remove the D-pillar upper trim panel.
- Release the 4 clips.
- Disconnect the electrical connector.
4
NOTE:
Do not disassemble further if the component is removed for access only.
Remove the speaker.
- Remove the 3 screws.
Installation
1 To install, reverse the removal procedure.
- Tighten the new Torx bolt to 40 Nm (30 lb.ft).