Pillar Trim
A-Pillar Trim Panel
Removal
1 Release the door weatherstrip to access the A-pillar upper trim panel and instrument panel end panel.
2 Remove the instrument panel end panel.
- Release the clip.
3 Remove the A-pillar upper trim panel.
- Release the screw cover.
- Remove and discard the Torx screw.
- Release the clip.
4
NOTE:
Do not disassemble further if the component is removed for access only.
Remove the screw retainer and clip from the A-pillar upper trim panel.
Installation
1 Install the screw retainer and clip to the A-pillar upper trim panel.
2 Install the A-pillar upper trim panel.
- Secure with the clip.
- Install a new Torx screw and tighten to 3 Nm (2 lb.ft).
- Install the screw cover.
3 Install the instrument panel end panel.
- Secure with the clip.
4 Attach the door weatherstrip.