Oil Pan: Service and Repair

Oil Pan

Removal
1 Disconnect the battery ground cable. For additional information, refer to Specifications Service and Repair
2
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
Raise and support the vehicle.
3 Drain the engine oil. For additional information, refer to Engine Oil Draining and Filling Service and Repair




4 Release the harness bracket.
- Remove the 2 nuts.




5 Remove the oil pan.
- Remove the 10 bolts.
- Remove and discard the gasket.

Installation
1 Install the oil pan.
- Clean the component mating faces.
- Install a new gasket.
- Evenly and progressively tighten the bolts to 10 Nm (7 lb.ft).
2 Install the harness bracket.
- Tighten the nuts to 6 Nm (4 lb.ft).
3 Fill the engine with oil. For additional information, refer to Engine Oil Draining and Filling Service and Repair
4 Connect the battery ground cable. For additional information, refer to Specifications Service and Repair