Auxiliary Battery Tray
Auxiliary Battery Tray
Removal
1 Remove the battery cover.
- Release the 2 clips.
2 Disconnect the battery ground cable. For additional information, refer to Specifications Service and Repair
3 If installed, remove the auxiliary battery.
4 Remove the engine compartment upper heat shield.
- Remove the screw.
- Release the 2 clips.
5 Remove the auxiliary battery compartment side wall.
- Release the battery positive cable and grommet.
- Release the four clips.
6 Release the A/C pipes.
- Remove the retaining screw.
7 Remove the auxiliary battery tray.
- Remove the three retaining nuts.
Installation
1 To install, reverse the removal procedure.
- Tighten the nuts to 12 Nm (9 lb.ft).