Front Door Window Motor: Testing and Inspection
Door Window Motor Initialization
1
NOTE:
After the battery has been disconnected it is necessary to initialize each door window motor separately to operate the "one-touch" up function.
NOTE:
Make sure a minimum of 2 minutes from initial disconnect of battery has elapse prior to reconnecting the battery. The initializing of the window glass motor must be conducted with the engine running.
Operate the window control switch until the door window glass is in the fully closed position, continue to operate the window control switch for a further two seconds.
2 Release the window control switch.
3 Operate the window control switch in the closed position and continue to operate the window control switch for a further two seconds.
4 Operate the window control switch until the door window glass is in the fully open position ("one-touch" down).
5
NOTE:
If the door window motor initialization has been completed correctly, when the window control switch is operated, the door window glass should move to the fully closed position ("one-touch" up) automatically.
NOTE:
If the door window glass does not fully close automatically ("one-touch" up), repeat the complete procedure.
Operate the window control switch once to the close position.
6 Repeat the door window motor initialization for each door window motor.