Operation CHARM: Car repair manuals for everyone.

Fuel Door Latch: Service and Repair





Fuel Filler Interlock Catch

Removal
1 Disconnect the battery ground cable. For additional information, refer to Specifications Service and Repair
2 Remove the C-pillar lower trim panel. For additional information, refer to C-Pillar Lower Trim Panel C-Pillar Lower Trim Panel




3 Remove the fuel filler interlock catch assembly.
- Remove the clip.
- Release the cable.
- Disconnect the electrical connector.




4 Remove the solenoid.
- Remove the 2 Torx screws.
- Release the cable.




5
NOTE:
Do not disassemble further if the component is removed for access only.
Release and remove the cable.
- Release the clip.

Installation
1 Install the cable.
- Secure the clip.
2 Install the solenoid.
- Attach the cable.
- Install the Torx screws.
3 Install the fuel filler flap latch assembly.
- Connect and secure the electrical connector.
- Carefully secure the clips.
4 Install the C-pillar lower trim panel. For additional information, refer to C-Pillar Lower Trim Panel C-Pillar Lower Trim Panel
5 Connect the battery ground cable. For additional information, refer to Specifications Service and Repair