Trunk / Liftgate Latch: Adjustments

Liftgate Striker Adjustment




1 Check for an equal gap and alignment to the adjacent panels. If incorrect, follow the adjust procedure below.




2 Remove the spare wheel cover.




3 Remove the loadspace scuff plate.




4 Loosen the 2 liftgate striker bolts.
5 Close the liftgate and check for an equal gap and alignment to the adjacent panels.
6 Open the liftgate and tighten the liftgate striker bolts.
Torque to: 25 Nm
7 Install the loadspace scuff plate.
8 Install the spare wheel cover.