Removal and Replacement

Roof Opening Panel Blind
This is a "Trustmark Authoring Standards (TAS) Repair Procedure"
- TAS style procedures can be identified by steps that have no accompanying step text and the magenta color of the electrical connectors and fasteners such as nuts, bolts, clamps or clips.
- TAS removal and installation procedures use a sequence of color illustrations to indicate the order to be followed when removing/disassembling or installing/assembling a component.
- Many of the TAS procedures will have the installation information within the removal steps.
- The TAS color illustrations use a variety of symbols to indicate important details of the procedures. It is important to understand these symbols in order to properly used the TAS procedures.
Refer to How to Use TAS Procedures and TAS Symbol Glossary at Vehicle | Description and Operation for additional information on these TAS procedures.
For additional information, refer to How to Use TAS Procedures How to Use TAS Procedures

Removal
1 Remove both A-pillar trim panels.
For additional information, refer to A-Pillar Trim Panel A-Pillar Trim Panel
2 Remove both B-pillar upper trim panels.
For additional information, refer to B-Pillar Upper Trim Panel B-Pillar Upper Trim Panel
3 Remove both C-pillar trim panels.
For additional information, refer to C-Pillar Trim Panel C-Pillar Trim Panel
4 Remove both D-pillar upper trim panels.
For additional information, refer to D-Pillar Trim Panel D-Pillar Trim Panel
5 Remove the interior rear view mirror.
For additional information, refer to Interior Rear View Mirror Interior Rear View Mirror




6 Remove both sun visors.




7 Remove the 4 passenger assist handles.




8 Release the rear of the headliner.




9 Release the front door seals.





10 Release the headliner.





11 Close the roof opening panel blind.





CAUTION: Do not allow the roof opening panel blind tube to rotate.

CAUTION: Do not release the metal pin from its locator until the locking pin is in place.
Carefully slide the roof opening panel blind tube to the right.
Release the plastic pin from its locator.




Using a suitable pin (1 mm diameter), lock the roof opening panel blind.
Release the metal pin from its locator.





12 Remove the roof opening panel blind.

Installation
1 Install the roof opening panel blind slider feet to the guides.

CAUTION: Do not allow the roof opening panel blind tube to rotate until the plastic pin is secure in its locator.
Secure the metal pin to its locator.
Remove the locking pin from the roof opening panel blind.
Carefully slide the roof opening panel blind tube to the right.
Align and secure the plastic pin to its locator.
2 Open the roof opening panel blind.
3 Secure the headliner.
4 Attach the front door seals.
5 Attach the rear of the headliner.
6 Install
the passenger assist handles.
7 Install the sun visors.
8 Install the interior rear view mirror.
For additional information, refer to Interior Rear View Mirror Interior Rear View Mirror
9 Install the D-pillar trim panels.
For additional information, refer to D-Pillar Trim Panel D-Pillar Trim Panel

10 Install the C-pillar trim panels.
For additional information, refer to C-Pillar Trim Panel C-Pillar Trim Panel

11 Install the B-pillar trim panels.
For additional information, refer to B-Pillar Upper Trim Panel B-Pillar Upper Trim Panel

12 Install the A-pillar trim panels.
For additional information, refer to A-Pillar Trim Panel A-Pillar Trim Panel