Front Door Window Glass: Service and Repair

Front Door Window Glass
This is a "Trustmark Authoring Standards (TAS) Repair Procedure"
- TAS style procedures can be identified by steps that have no accompanying step text and the magenta color of the electrical connectors and fasteners such as nuts, bolts, clamps or clips.
- TAS removal and installation procedures use a sequence of color illustrations to indicate the order to be followed when removing/disassembling or installing/assembling a component.
- Many of the TAS procedures will have the installation information within the removal steps.
- The TAS color illustrations use a variety of symbols to indicate important details of the procedures. It is important to understand these symbols in order to properly used the TAS procedures.
Refer to How to Use TAS Procedures and TAS Symbol Glossary at Vehicle | Description and Operation for additional information on these TAS procedures.
For additional information, refer to How to Use TAS Procedures How to Use TAS Procedures

Removal





Special Service Tool




Release Lever, Door Glass, 501-114





Installation






CAUTION: Make sure that the door glass retaining brackets are pushed to the edge of the door window glass to achieve minimum parallel gap.

NOTE:
This operation must be done for both retaining brackets.

Torque to: 6 Nm





CAUTION: Make sure that any grease or lubricant is removed from the retaining brackets prior to installation of the anti-rattle pads.

CAUTION: Make sure that the anti-rattle pad is installed in the orientation illustrated.

NOTE:
This operation must be done for both retaining brackets.
1 To install, reverse the removal procedure.