Procedures

Roof Opening Panel Alignment
1
NOTE:
The roof opening panel must be closed
Check the alignment of the roof opening panel.
- The roof opening panel should be central in the roof opening.
- The roof opening panel should be level with the roof, or no more than 1mm (0.040 inch) above the roof.
2 Raise the roof opening panel glass.
- Open the roof opening panel shield.




3 Release the upper edges of the RH and LH roof opening panel side trims.
4 Close the roof opening panel.




5 Loosen the 6 screws.
6 Align the roof opening panel glass.
- Tighten the screws to 6 Nm (4 lb.ft).
7 Align the roof opening panel glass.
8 Secure the upper edges of the RH and LH roof opening panel side trims.
9 Close the roof opening panel glass.
- Close the roof opening panel shield.