Rear Seat

Rear Seat

Removal





1 Remove the 2 bolts from the front of the rear seat hinge plates.
- Fit protection around the door aperture to protect the interior.
- Remove the 2 bolt covers from the front of the rear seat hinge plates.
2 Fold the rear seat fully forwards.
- Release the rear seat backrest catch.




3
CAUTION: Make sure no damage is caused to the vehicle trim when removing the rear seat.
With assistance carefully remove the rear seat.
- Disconnect the electrical connector.
- Remove the 2 nuts from the rear of the rear seat hinge plates.

Installation
1
CAUTION: Make sure no damage is caused to the vehicle trim when installing the rear seat.
With assistance carefully install the rear seat.
- Install the 2 nuts to the rear of the rear seat hinge plates.
- Tighten to 25 Nm (18 lb.ft).
- Connect the electrical connector.
2 Fold the rear seat fully rearwards.
- Secure the rear seat backrest catch.
3 Install the 2 bolts to the front of the rear seat hinge plates.
- Tighten to 25 Nm (18 lb.ft).
- Install the 2 bolt covers to the front of the rear seat hinge plates.
- Remove the protection from around the door aperture.