Radiator Cooling Fan: Service and Repair
Cooling Fan
This is a "Trustmark Authoring Standards (TAS) Repair Procedure"
- TAS style procedures can be identified by steps that have no accompanying step text and the magenta color of the electrical connectors and fasteners such as nuts, bolts, clamps or clips.
- TAS removal and installation procedures use a sequence of color illustrations to indicate the order to be followed when removing/disassembling or installing/assembling a component.
- Many of the TAS procedures will have the installation information within the removal steps.
- The TAS color illustrations use a variety of symbols to indicate important details of the procedures. It is important to understand these symbols in order to properly used the TAS procedures.
Refer to How to Use TAS Procedures and TAS Symbol Glossary at Vehicle | Description and Operation for additional information on these TAS procedures.
For additional information, refer to How to Use TAS Procedures How to Use TAS Procedures
Removal
NOTE:
Removal steps in this procedure may contain installation details.
1 Disconnect the battery ground cable.
For additional information, refer to Specifications Battery and Charging System
WARNING: Make sure to support the vehicle with axle stands.
2 Raise and support the vehicle.
For additional information, refer to Air Cleaner Outlet Pipe T-Connector Air Cleaner Outlet Pipe T-Connector
For additional information, refer to Air Cleaner Outlet Pipe LH Air Cleaner Outlet Pipe LH
For additional information, refer to Air Cleaner Outlet Pipe RH Air Cleaner Outlet Pipe RH
NOTE:
Some variation in the illustrations may occur, but the essential information is always correct.
NOTE:
Some variation in the illustrations may occur, but the essential information is always correct.
CAUTION: Always protect the cooling pack elements to prevent accidental damage.
NOTE:
The thread is left handed.
NOTE:
Some variation in the illustrations may occur, but the essential information is always correct.
Special Service Tool
Viscous Coupling Wrench, 303-1142
Special Service Tool
Viscous Coupling Holding Tool, 303-1143
Torque to: 65 Nm
NOTE:
Some variation in the illustrations may occur, but the essential information is always correct.
CAUTION: Always protect the cooling pack elements to prevent accidental damage.
NOTE:
Some variation in the illustrations may occur, but the essential information is always correct.
Installation
1 To install reverse the removal procedure.