Navigation System

DIAGNOSTIC TROUBLE CODE CHART






1. PHYSICAL ADDRESS: 110 MULTI DISPLAY (EMV)

HINT:
- *1: Even if no failure is detected, it may be stored depending on the battery condition or voltage to starting an engine.
- *2: It is stored when 180 sec. have passed after the power supply connector is pulled out after the engine start.
- *3: It may be stored when the engine key is turned again after the engine start.
- *4: It may be stored when the engine key is turned 1 min. again after the engine start.

21 - E3:

a. Logical address: 01 (Communication control)

10 - 11:

b. Logical address: 21 (Switch)

10 - 12:

c. Logical address: 34 (Front passenger monitor)

2. PHYSICAL ADDRESS: 1C6 GATEWAY ECU (G/W-ECU)

HINT:
*1: When 210 sec has passed after pulling out the power supply connector of the master component with the ignition switch in ACC or ON, this code is stored.

D4:

Logical address: 01 (Communication control)

3. PHYSICAL ADDRESS: 190 RADIO RECEIVER (AUDIO H/U)

HINT:
- *1: Even if no failure is detected, it may be stored depending on the battery condition or voltage for starting an engine.
- *2: It is stored when 180 sec. have passed after the power supply connector is pulled out after engine start.
- *3: It may be stored when the engine key is turned 1 min. again after the engine start.
- *4: It may be stored when the engine key is turned again after the engine start.
- *5: When 210 sec. have passed after pulling out the power supply connector of the master component with the ignition switch in ACC or ON, this code is stored.

D6 - DD:

DE - E4:

a. Logical address: 01 (Communication control)

40:

b. Logical address: 61 (Cassette)

4. PHYSICAL ADDRESS: 178 NAVIGATION ECU (NAVI-ECU)

HINT:
- *1: Even if no failure is detected, it may be stored depending on the battery condition or voltage for starting an engine.
- *2: When 210 sec. has passed after pulling out the power supply connector of the master component with the ignition switch in ACC or ON, this code is stored.
- *3: It may be stored when the engine key is turned 1 min. again after engine start.
- *4: It may be stored when the engine key is turned again after engine start.

D6:

D7 - E3:

a. Logical address: 01 (Communication control)

10 - 44:

b. Logical address: 58 (Navigation ECU)

11 - 40:

41 - 45:

c. Logical address: 80 (GPS receiver)

5. PHYSICAL ADDRESS: 440 STEREO COMPONENT AMPLIFIER (DSP AMP)

HINT:
- *1: Even if no failure is detected, it may be stored depending on the battery condition or voltage for starting an engine.
- *2: It may be stored when the engine key is turned 1 min. again after engine start.
- *3; It may be stored when the engine key is turned again after engine start.
- *4; When 210 sec. have passed after pulling out the power supply connector of the master component with the ignition switch in ACC or ON, this code is stored.

D6 - DD:

DF - E3:

a. Logical address: 01 (Communication control)

6. PHYSICAL ADDRESS: 250 DVD AUTO CHANGER (DVD-CH)

HINT:
- *1: Even if no failure is detected, it may be stored depending on the battery condition or voltage for starting an engine.
- *2: It may be stored when the engine key is turned 1 min. again after engine start.
- *3: It may be stored when the engine key is turned again after engine start.
- *4: It may be stored when the engine key is turned again after engine start.
- *5: When 210 sec. has passed after pulling out the power supply connector of the master component with the ignition switch in ACC or ON, this code is stored.

21 - D7:

DC - E4:

a. Logical address: 01 (Communication control)

44 - 48:

50 - 51:

b. Logical address 45 (DVD Changer)