C1711

DTC C1711 OPEN OR SHORT CIRCUIT IN RIGHT FRONT HEIGHT CONTROL SENSOR CIRCUIT

CIRCUIT DESCRIPTION

DTC Detecting Condition:

Inside each sensor, a brush integrated with the control sensor rotor shaft moves above the resister, proving linear output. The resistance value between the brush and resistor terminal changes in proportion to the shaft rotation angle, so the fixed voltage applied to the resistor by the ECU is modified by the sensor and output to the ECU as a voltage indication the shaft rotation angle.

HINT:
- Code C1711 / 11 corresponds to the right front height control sensor circuit.
- Code C1712 / 12 corresponds to the left front height control sensor circuit.
- Code C1713 / 13 corresponds to the rear height control sensor circuit.

Fail safe function:

If a trouble occurs in the height control sensor circuit, the height control is prohibited after the ECU has adjusted the vehicle height to the standard (fluid pressure correspond to the standard height).

Wiring Diagram:

Step 1:

Step 1 (Continued) - 2:

Step 2 (Continued) - 3:

INSPECTION PROCEDURE