B1232

DTC B1232 Jam Protection Pulse Switch Circuit on Driver Door

DESCRIPTION

DTC Detection Condition:

This DTC is output when failure of the jam protection pulse switch circuit is detected. The jam protection pulse switch is built into the power window regulator motor assembly. This switch is OFF when the window stays between the fully closed position and 4 mm (0.16 in) below the full closed position and the power window regulator master switch reads this signal.

Wiring Diagram:

Step 1-3:

INSPECTION PROCEDURE.

HINT: When using the intelligent tester, start from *1. When not using the intelligent tester, start from *2.