Data List / Active Test

DATA LIST / ACTIVE TEST








1. DATA LIST
With the intelligent tester connected to the DLC3 and the ignition switch turned ON, the VGRS data list can be displayed. Follow the prompts on the tester screen to access the DATA LIST

NOTICE:
*1: This data must read valid before proceeding with any steering adjustments. If invalid, perform steering angle sensor initialization procedure, or if VGRS actuator or VG IRS ECU has been replaced, perform VGRS system calibration (steering angle adjustment).

HINT:
*2: When Rec is listed, reset to Unrec by going to the VGRS menu on the intelligent tester, select records clearance, and follow the prompts.