B1182

DTC B1182/19 Short to GND in Driver Side Squib 2nd Step Circuit

DESCRIPTION

DTC Detecting Condition:

The driver side squib 2nd step circuit consists of the center airbag sensor assembly, the spiral cable and the steering pad.

The circuit instructs the SRS to deploy when deployment conditions are met.

DTC B1182/19 is recorded when a short to ground is detected in the driver side squib 2nd step circuit.

Wiring Diagram:

Step 1:

Step 2-3:

Step 4-5:

INSPECTION PROCEDURE

HINT:
- Perform the simulation method by selecting the "check mode" (signal check) with the intelligent tester.
- After selecting the "check mode" (signal check), perform the simulation method by wiggling each connector of the airbag system or driving the vehicle on a city or rough road.