C1254

DTC C1254/54 Pressure Switch Circuit

DESCRIPTION

DTC Detection Condition:

The accumulator pressure sensor is connected to the skid control ECU in the master cylinder solenoid.

HINT: If the code (C1254/54) is output, the following conditions will occur:
- The ABS, VSC TRAC, and BRAKE warning lights and SLIP and VSC OFF indicator lights will come on.
- The skid control buzzer sounds.
- Control of all systems other than EBD is canceled.

Step 1-2:

Step 3:

INSPECTION PROCEDURE

NOTE: When replacing the master cylinder solenoid, perform zero point calibration. Calibration