Hybrid Vehicle Control ECU Communication Stop Mode

CAN COMMUNICATION SYSTEM: Hybrid Vehicle Control ECU Communication Stop Mode

Hybrid Vehicle Control ECU Communication Stop Mode

DESCRIPTION





WIRING DIAGRAM





INSPECTION PROCEDURE

PROCEDURE

1. CHECK WIRE HARNESS (+B1, +B2, IGSW, MREL, E1)





(a) Measure the resistance according to the value(s) in the table below.
Standard resistance:





(b) Measure the voltage according to the value(s) in the table below.
Standard voltage:






NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- REPLACE HYBRID VEHICLE CONTROL ECU