Removal

LIGHTING (INT): PERSONAL LIGHT: REMOVAL

1. REMOVE MAP LIGHT ASSEMBLY

(a) w/ Holder:

(1) Open the holder.

(b) w/o Holder:

(1) Using a screwdriver wrapped with protective tape, disengage the 2 claws and disconnect the cover.

Text in Illustration

(d) Remove the 2 screws.

(e) Using a moulding remover, disengage the 2 clips and 2 guides.

(f) Disconnect each connector and remove the map light assembly.

2. REMOVE MAP LIGHT BULB

(a) Turn the 2 map light bulbs and 2 map light sockets in the direction indicated by the arrows in the illustration and remove them as a unit.

(b) Remove the 2 map light bulbs from the 2 map light sockets.