Personal Light

LIGHTING (INT): PERSONAL LIGHT: INSPECTION

1. INSPECT MAP LIGHT ASSEMBLY

(a) Inspect the interior lights.

(1) Connect a positive (+) lead from the battery to terminal 9 (+B1) and a negative (-) lead to terminal 12 (CTY).





(2) Check that the interior lights come on.

OK:

Interior lights come on.

Text in Illustration





(2) If the result is not as specified, replace the map light assembly.

(b) Inspect the interior light door switch and on/off switch.

(1) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





(1) If the result is not as specified, replace the map light assembly.

(c) Inspect the personal lights.

(1) Connect a positive (+) lead from the battery to terminal 9 (+B1) and a negative (-) lead to terminal 40 (GND).

(2) Check that the personal lights come on.

OK:





(2) If the result is not as specified, replace the bulb or map light assembly.

(d) Inspect the center console spot light.

(1) Connect a positive (+) lead from the battery to terminal 9 (+B1) and a negative (-) lead to terminal 16 (SHFT).

(2) Check that the center console spot light comes on.

OK:

Center console spot light comes on.

(2) If the result is not as specified, replace the map light assembly.

(e) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





(f) If the result is not as specified, replace the map light assembly.