Removal

CELLULAR COMMUNICATION: DCM(TELEMATICS TRANSCEIVER): REMOVAL

1. PRECAUTION

NOTICE:
* After the engine switch is turned off, the display and navigation module display (HDD navigation system) records various types of memory and settings. As a result, after turning the engine switch off, make sure to wait at least 60 seconds before disconnecting the cable from the negative (-) battery terminal.
* When replacing the DCM (telematics transceiver), perform DCM activation DCM Activation.
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY Removal

4. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY Removal

5. REMOVE NO. 2 CONSOLE BOX DUCT Removal

6. REMOVE CONSOLE REAR END PANEL SUB-ASSEMBLY Removal

7. REMOVE MULTI-MEDIA INTERFACE ECU ASSEMBLY (w/ USB Audio System) Removal

8. REMOVE REAR CONSOLE BOX ASSEMBLY Removal

9. REMOVE INSTRUMENT PANEL GARNISH LH Removal

10. REMOVE NO. 1 SWITCH HOLE BASE Removal

11. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY Removal

12. REMOVE INSTRUMENT PANEL FINISH PANEL Removal

13. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL Removal

14. REMOVE CONSOLE BOX Removal

15. REMOVE DCM (TELEMATICS TRANSCEIVER) WITH BRACKET (w/o Rear Seat Entertainment System)

(a) Disconnect the 4 connectors.





(b) Remove the 3 bolts.

(c) Disengage the guide and remove the DCM (telematics transceiver) with bracket.

16. REMOVE DCM (TELEMATICS TRANSCEIVER) WITH BRACKET (w/ Rear Seat Entertainment System)

(a) Disconnect the 7 connectors.





(b) Remove the 3 bolts.

(c) Disengage the guide and remove the DCM (telematics transceiver) with bracket.

17. REMOVE REAR SEAT ENTERTAINMENT ECU ASSEMBLY (w/ Rear Seat Entertainment System)

(a) Remove the 3 nuts and rear seat entertainment ECU assembly.





18. REMOVE TELEPHONE BRACKET

(a) Remove the 3 nuts and telephone bracket.





19. REMOVE NO. 1 TELEPHONE BRACKET

(a) Remove the 2 bolts and No. 1 telephone bracket.





20. REMOVE NO. 2 TELEPHONE BRACKET

(a) Remove the 2 bolts and No. 2 telephone bracket.





21. REMOVE DCM (TELEMATICS TRANSCEIVER)