Removal
CELLULAR COMMUNICATION: DCM(TELEMATICS TRANSCEIVER): REMOVAL
1. PRECAUTION
NOTICE:
* After the power switch is turned off, the display and navigation module display (HDD navigation system) records various types of memory and settings. As a result, after turning the power switch off, make sure to wait at least 60 seconds before disconnecting the cable from the negative (-) battery terminal.
* When replacing the DCM (telematics transceiver), perform DCM activation DCM Activation.
2. REMOVE REAR DECK FLOOR BOX Removal
3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.
4. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY Removal
5. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY Removal
6. REMOVE NO. 2 CONSOLE BOX DUCT Removal
7. REMOVE CONSOLE REAR END PANEL SUB-ASSEMBLY Removal
8. REMOVE MULTI-MEDIA INTERFACE ECU ASSEMBLY (w/ USB Audio System) Removal
9. REMOVE REAR CONSOLE BOX ASSEMBLY Removal
10. REMOVE INSTRUMENT PANEL GARNISH LH Removal
11. REMOVE NO. 1 SWITCH HOLE BASE Removal
12. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY Removal
13. REMOVE INSTRUMENT PANEL FINISH PANEL Removal
14. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL Removal
15. REMOVE CONSOLE BOX Removal
16. REMOVE DCM (TELEMATICS TRANSCEIVER) WITH BRACKET (w/o Rear Seat Entertainment System)
(a) Disconnect the 4 connectors.
(b) Remove the 3 bolts.
(c) Disengage the guide and remove the DCM (telematics transceiver) with bracket.
17. REMOVE DCM (TELEMATICS TRANSCEIVER) WITH BRACKET (w/ Rear Seat Entertainment System)
(a) Disconnect the 7 connectors.
(b) Remove the 3 bolts.
(c) Disengage the guide and remove the DCM (telematics transceiver) with bracket.
18. REMOVE REAR SEAT ENTERTAINMENT ECU ASSEMBLY (w/ Rear Seat Entertainment System)
(a) Remove the 3 nuts and rear seat entertainment ECU assembly.
19. REMOVE TELEPHONE BRACKET
(a) Remove the 3 nuts and telephone bracket.
20. REMOVE NO. 1 TELEPHONE BRACKET
(a) Remove the 2 bolts and No. 1 telephone bracket.
21. REMOVE NO. 2 TELEPHONE BRACKET
(a) Remove the 2 bolts and No. 2 telephone bracket.
22. REMOVE DCM (TELEMATICS TRANSCEIVER)