Installation

WIPER / WASHER: HEADLIGHT CLEANER ACTUATOR: INSTALLATION

1. INSTALL HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY

(a) Engage the 2 claws.





(b) Install the headlight washer actuator sub-assembly with the bolt.

Torque : 1.1 Nm (11 kgf-cm, 10 in-lbf)

HINT
Use the same procedure for the RH side and LH side.

2. INSTALL HEADLIGHT CLEANER WASHER NOZZLE Installation

3. INSTALL FRONT BUMPER ASSEMBLY Installation

4. INSTALL HOOD CENTER CUSHION Installation

5. INSTALL COOL AIR INTAKE DUCT SEAL Installation

6. INSTALL ENGINE ROOM SIDE COVER Installation

7. INSTALL ENGINE ROOM SIDE COVER LH Installation

8. ADD WASHER FLUID

(a) Add washer fluid to the washer jar.

9. PREPARE VEHICLE FOR FOG LIGHT AIM ADJUSTMENT Adjustments

10. PREPARE FOR FOG LIGHT AIMING Adjustments

11. INSPECT FOG LIGHT AIMING Adjustments

12. ADJUST FOG LIGHT AIMING Adjustments