System Description

PARK ASSIST / MONITORING: SIDE MONITOR SYSTEM: SYSTEM DESCRIPTION

* *1: w/ Navigation System

* *2: w/o Navigation System

* *3: w/ Multi-terrain Monitor

1. GENERAL

(a) This system has a side television camera assembly built into the front passenger side outer rear view mirror assembly and driver side outer rear view mirror assembly*3 to display the passenger side view and driver side view* of the vehicle on the display and navigation module display*1 or accessory meter assembly*2.

(b) This system consists of the following components: steering pad switch assembly (Wide view front and side monitor switch) and combination meter assembly.

(1) Front passenger side television camera assembly

(2) Driver side television camera assembly*3

(3) Parking assist ECU

(4) Display and navigation module display*1

(5) Accessory meter assembly*2

(6) Steering pad switch assembly (Wide view front and side monitor switch)

(7) Spiral cable sub-assembly

(8) Driving support switch control ECU*3

(9) Skid control ECU

(10) ECM

(c) This system is equipped with a self-diagnosis system, which is operated on a designated window that appears on the display panel, just as in the navigation system.

2. FUNCTION OF COMPONENTS

(a) The parking assist ECU controls the system by using information from the following components.





3. OPERATION EXPLANATION

(a) The wide view front and side monitor switch on signal is sent from the steering pad switch assembly to the parking assist ECU.

After receiving the wide view front and side monitor switch on signal, the parking assist ECU switches the display signal for the display and navigation module display*1 or accessory meter assembly*2 from the meter and gauge system to the side monitor system.

4. DISPLAY CONDITIONS FOR SIDE MONITOR DISPLAY

(a) Screen display operation





Text in Illustration





(1) After the display conditions are met while the side monitor system is operating normally (when no DTCs are stored), the side monitor display will be displayed.

(b) Display conditions for manual display mode, when shift lever is in R

(1) The side monitor system changes the displayed image when the wide view front and side monitor switch is operated while the following conditions are met and either the engine switch is on (IG) or the engine is running (no DTCs stored).









Text in Illustration





(c) Display conditions for manual display mode, when shift lever is not in R

(1) The side monitor system changes the displayed image when the wide view front and side monitor switch is operated while the following conditions are met and either the engine switch is on (IG) or the engine is running (no DTCs stored).









Text in Illustration





5. DISPLAY CONDITIONS FOR MULTI-TERRAIN MONITOR

(a) Turn the engine switch on (IG).

NOTICE:
Make sure that the vehicle does not move by applying the parking brake firmly.

(b) Turn multi-terrain select mode on.

(c) Select "CAM. POSITION".





(d) The following are the display conditions for camera selection in multi-terrain select mode when the shift lever is not in R.









Text in Illustration





(e) The following are the display conditions for camera selection in multi-terrain select mode when the shift lever is in R.









Text in Illustration