Replacement

DOOR LOCK: TRANSMITTER BATTERY: REPLACEMENT

1. REMOVE TRANSMITTER BATTERY

NOTICE:
Take extra care when handling these precision electronic components.

(a) Push and hold the release knob in the direction indicated by the arrow in the illustration. Then take the mechanical key out of the case.





(b) Insert a precision screwdriver into the gap and turn the screwdriver to detach the transmitter housing cover.





HINT
Tape the screwdriver tip before use.

(c) Insert a precision screwdriver into the gap and remove the battery (lithium battery: CR1632).





NOTICE:
* When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.
* Do not push the terminals with your finger.
* Do not forcibly pry up the battery. The terminals may be damaged.
* Do not touch the battery with wet hands. Water may cause rust.
* Do not touch or move any components inside the transmitter. It may interfere with proper operation.

2. INSTALL TRANSMITTER BATTERY

(a) Install the battery (lithium battery: CR1632) with the positive (+) side facing upward as shown in the illustration.





NOTICE:
* When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.
* Do not bend the transmitter battery electrode during insertion.
* Keep the transmitter cover interior free of dust and oil.

(b) Install the transmitter housing cover by pressing down on it.

(c) Insert the mechanical key into the transmitter.

(d) Press one of the transmitter's switches and check that the LED illuminates.