Installation

1UR-FE BATTERY / CHARGING: GENERATOR: INSTALLATION

1. INSTALL GENERATOR ASSEMBLY

(a) Install the generator with the 3 bolts and nut.

Torque : 43 Nm (438 kgf-cm, 32 ft-lbf)

(b) Connect the wire harness bracket to the generator with the bolt.

Torque : 24 Nm (245 kgf-cm, 18 ft-lbf)

(c) Attach the generator wire.

(d) Connect the generator wire with the nut.

Torque : 9.8 Nm (100 kgf-cm, 87 in-lbf)

(e) Install the terminal cap.

(f) Connect the generator connector.

(g) Connect the No. 2 return tube bracket with the bolt.





Torque : 28 Nm (286 kgf-cm, 21 ft-lbf)

2. CONNECT VANE PUMP ASSEMBLY

(a) Connect the vane pump with the 2 bolts.

Torque : 43 Nm (438 kgf-cm, 32 ft-lbf)

(b) Attach the clamp and connect the connector.

3. INSTALL FRONT FENDER APRON SEAL RH Installation

4. INSTALL AIR CLEANER CASE SUB-ASSEMBLY Installation

5. INSTALL AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

6. INSTALL AIR CLEANER CAP AND HOSE Installation

7. INSTALL RADIATOR ASSEMBLY

(a) Install the radiator assembly Installation.

8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.