All Power Windows Do Not Operate With Driver Side Door Key Cylinder Or Wireless Transmitter

WINDOW / GLASS: POWER WINDOW CONTROL SYSTEM: All Power Windows do not Operate with Driver Side Door Key Cylinder or Wireless Transmitter
- All Power Windows do not Operate with Driver Side Door Key Cylinder or Wireless Transmitter

DESCRIPTION

* When a key switch is pushed: 1) the door control receiver receives the key signal; 2) the door control receiver sends a signal to the certification ECU; 3) the main body ECU (multiplex network body ECU) sends the operation permission signal to the power window regulator motors; and 4) the power window regulator motor assemblies are activated.

* When the driver door key cylinder (key-linked switch) is turned: 1) the door lock motor receives the signal; 2) the main body ECU (multiplex network body ECU) sends the signal to the power window regulator motors; and 3) the power window regulator motor assemblies are activated.

INSPECTION PROCEDURE

HINT
Since the power window control system has functions that use LIN communication, first confirm that there is no malfunction in the communication system by inspecting the LIN communication functions in accordance with the "How to Proceed with Troubleshooting" procedures. Then, conduct the following inspection procedure.

PROCEDURE

1. CHECK BASIC FUNCTION (WIRELESS AND POWER DOOR LOCK CONTROL SYSTEM)

(a) Check that the wireless transmitter and driver door key cylinder (key-linked switch) lock and unlock all the doors normally Operation Check.

Result





B -- GO TO WIRELESS DOOR LOCK CONTROL SYSTEM How To Proceed With Troubleshooting

C -- GO TO POWER DOOR LOCK CONTROL SYSTEM Problem Symptoms Table
A -- Continue to next step.

2. CHECK MANUAL UP/DOWN FUNCTION

(a) Check that the manual up/down function using the multiplex network master switches and power window regulator switch can operate all the power windows Operation Check.

OK:

Manual up/down function is normal.

NG -- GO TO OTHER PROBLEM (Proceed to Problem Symptoms Table) Problem Symptoms Table
OK -- Continue to next step.

3. CHECK REMOTE UP/DOWN FUNCTION

(a) Check that the remote up/down function using the multiplex network master switch operates the power windows Operation Check.

OK:

Remote up/down function is normal.

NG -- GO TO OTHER PROBLEM (Proceed to Problem Symptoms Table) Problem Symptoms Table

OK -- REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) Removal