Power Steering System

POWER ASSIST SYSTEMS: POWER STEERING SYSTEM: DIAGNOSTIC TROUBLE CODE CHART

HINT
If a trouble code is displayed during the DTC check, inspect the trouble areas listed for that code. For details of the code, refer to the "See page" below.

Power Steering System













* *1: Warning light comes on

* *2: Warning light turns off (normal reset)

* *3:

a. If a +B power supply voltage short occurs: Power switch on (IG) again after +B voltage has returned to normal (+B voltage has returned to normal when the voltage is 16 V or less.)

a. If +B power supply voltage drops: Power switch on (IG) again after +B voltage has returned to normal (+B voltage has returned to normal when the voltage is 9 V or more.)