Removal

2GR-FXE COOLING: EXHAUST PIPE GAS CONTROL ACTUATOR: REMOVAL

1. PRECAUTION (w/ Air Suspension)

2. REMOVE ENGINE ROOM SIDE COVER Removal

3. REMOVE ENGINE ROOM SIDE COVER LH Removal

4. REMOVE COOL AIR INTAKE DUCT SEAL Removal

5. REMOVE V-BANK COVER SUB-ASSEMBLY Removal

6. REMOVE NO. 1 ENGINE UNDER COVER

7. DRAIN ENGINE COOLANT (for Engine) Coolant (for Engine)

8. REMOVE FRONT FLOOR COVER LH Removal

9. REMOVE HEATER COVER Removal

10. REMOVE TEMPERATURE SWITCH Removal

11. REMOVE EXHAUST PIPE GAS CONTROL ACTUATOR

(a) Disconnect the 2 heater hoses.

(b) Using a screwdriver with the tip taped, pry the spring end to disengage the spring.

Text in Illustration

(d) While closing port A, apply compressed air to port B to remove the exhaust pipe gas control actuator and exhaust pipe gas control stopper as shown in the illustration.

Text in Illustration

HINT
Use a piece of cloth to catch the exhaust pipe gas control actuator.