Installation

PARK ASSIST / MONITORING: CLEARANCE WARNING ECU: INSTALLATION

1. INSTALL CLEARANCE WARNING ECU ASSEMBLY

(a) Engage the 2 claws to install the clearance warning ECU assembly.





2. INSTALL ECU INTEGRATION BOX

(a) Install the ECU integration box with the bolt and 2 nuts.





Torque : 5.5 Nm (56 kgf-cm, 49 in-lbf)

3. CONNECT CONNECTOR HOLDER

(a) Engage the claw.





(b) Connect the connector holder with the nut.

Torque : 5.5 Nm (56 kgf-cm, 49 in-lbf)

(c) Engage the clamp and connect the wire harness.

4. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY Installation

5. INSTALL FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY Installation

6. INSTALL INSTRUMENT PANEL GARNISH RH

HINT
Use the same procedure for the RH side and the LH side Installation.

7. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Installation

8. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH

HINT
Use the same procedure for the RH side and the LH side Installation.

9. INSTALL FRONT DOOR SCUFF PLATE RH

HINT
Use the same procedure for the RH side and the LH side Installation.

10. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL Installation

11. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY Installation

12. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY Installation

13. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

14. INSTALL REAR DECK FLOOR BOX Installation

15. INSPECT SRS WARNING LIGHT

(a) Inspect the SRS warning light Diagnosis System.