Removal

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: SKID CONTROL ECU: REMOVAL

NOTICE:
While the battery is connected, even if the power switch is off, the brake control system activates when the brake pedal is depressed or any door courtesy switch is turned on. Therefore, when servicing the brake system components, do not depress the brake pedal or open/close the doors while the battery is connected.

1. PRECAUTION

CAUTION:
Be sure to read Precaution thoroughly before servicing Service Precautions.

2. REMOVE FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY

HINT
Refer to the procedure up to Remove Front Passenger Side Knee Airbag Assembly Removal.

3. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY Removal

4. SEPARATE ECU INTEGRATION BOX RH

(a) Remove the 2 nuts and bolt, separate the ECU integration box RH.





5. SEPARATE CONNECTOR HOLDER

(a) Remove the nut and separate the connector holder.

6. REMOVE SKID CONTROL ECU

(a) Remove the 2 bolts and skid control ECU.





(b) Disconnect the 4 connectors from the skid control ECU.