Removal

POWER DISTRIBUTION: POWER MANAGEMENT CONTROL ECU: REMOVAL

1. PRECAUTION (w/ Navigation System for HDD)

NOTICE:
After the power switch is turned off, the display and navigation module display (HDD navigation system) records various types of memory and settings. As a result, after turning the power switch off, make sure to wait at least 60 seconds before disconnecting the cable from the negative (-) battery terminal.

2. REMOVE REAR DECK FLOOR BOX Removal

3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system Service and Repair.

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

4. REMOVE FRONT DOOR SCUFF PLATE LH Removal

5. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH Removal

6. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Removal

7. REMOVE INSTRUMENT PANEL GARNISH LH Removal

8. REMOVE NO. 1 SWITCH HOLE BASE Removal

9. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY Removal

10. REMOVE DRIVER SIDE KNEE AIRBAG ASSEMBLY Removal

11. REMOVE POWER MANAGEMENT CONTROL ECU

(a) Disconnect the 4 connectors.





(b) Remove the 2 nuts and power management control ECU.