Removal

P313 HYBRID TRANSMISSION / TRANSAXLE: SHIFT LEVER: REMOVAL

1. PRECAUTION (w/ Navigation System for HDD)

NOTICE:
After the power switch is turned off, the display and navigation module display (HDD navigation system) records various types of memory and settings. As a result, after turning the power switch off, make sure to wait at least 60 seconds before disconnecting the cable from the negative (-) battery terminal.

2. REMOVE REAR DECK FLOOR BOX Removal

3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

4. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY Removal

5. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY Removal

6. REMOVE NO. 2 CONSOLE BOX DUCT Removal

7. REMOVE CONSOLE REAR END PANEL SUB-ASSEMBLY Removal

8. REMOVE MULTI-MEDIA INTERFACE ECU ASSEMBLY (w/ USB Audio System) Removal

9. REMOVE REAR CONSOLE BOX ASSEMBLY Removal

10. REMOVE INSTRUMENT PANEL GARNISH LH Removal

11. REMOVE NO. 1 SWITCH HOLE BASE Removal

12. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY Removal

13. REMOVE INSTRUMENT PANEL FINISH PANEL Removal

14. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL Removal

15. REMOVE FRONT CONSOLE BOX COVER Removal

16. REMOVE CONSOLE BOX Removal

17. REMOVE SHIFT LEVER ASSEMBLY

(a) Move the shift lever to N.

(b) Disconnect the shift lock control ECU connector and transmission control switch wire connector.





(c) Disconnect the 3 clamps.

(d) Remove the 4 nuts and shift lever assembly.

(e) Disconnect the end of the transmission control cable assembly from the shift lever assembly.





(f) Turn the lock nut counterclockwise. While holding the lock nut, disconnect the transmission control cable from the shift lever retainer.