B2211

DTC B2211 Door Closer Motor Malfunction on Driver Door

CIRCUIT DESCRIPTION

DTC Detecting Condition:

This DTC is output when failure of the cam position circuit is detected.

HINT: When cam position switch 1, 2 and 3 are not all "ON" or all "OFF", this DTC is cleared.

The closer detection switch is built in the door lock assembly.

This switch is used to detect the position of the closer motor.

The relationship between each switch and closer motor conditions is as follows.

When it operates regular rotation, the operation goes from top of the list. When reverse rotation, from bottom of the list.




If the closer detection switch does not operate in the order mentioned above, the Driver door ECU judges the closer operation as an error, and the operation is stopped.

Regular rotation: 1 -> 2 -> 3 -> 4 -> 6 -> 5 -> 1
Reverse rotation: 1 -> 5 -> 6 -> 4 -> 3 -> 2 -> 1

Wiring Diagram:

Step 1 - 3:

INSPECTION PROCEDURE

HINT: In case of using the LEXUS hand-held tester, start the inspection from step 1 and in case of not using the LEXUS hand-held tester, start from step 2.