B2288

DTC B2288 Steering Lock Signal Circuit Malfunction

DESCRIPTION

DTC Detection Condition:

This DTC is output when the main body ECU cannot detect the unlock condition of the steering lock within a specified time.

HINT: When the main body ECU is replaced with a new one and the negative (-) battery terminal is connected, the power source mode becomes the IG-ON mode. When the battery is removed and reinstalled, the power source mode that was selected when the battery was removed is restored.

After the main body ECU is replaced, perform the registration procedures for the engine immobilizer system.

Wiring Diagram:

Step 1:

Step 1 (Continued)-2:

Step 2 (Continued)-3:

INSPECTION PROCEDURE