P0851

DTC P0705-757 Transmission Range Sensor Circuit
DTC P0705-758 Transmission Range Sensor Circuit
DTC P0851-775 Park / Neutral Switch Input Circuit Low

DESCRIPTION

DTC Detection Condition:

The park / neutral position switch can send 8 different switch signals to the hybrid vehicle control ECU. The hybrid vehicle control ECU uses the signals to detect the shift lever position (P, R, N, or D). The hybrid vehicle control ECU also uses this information to determine intended direction of travel (forward or reverse).

Wiring Diagram:

Step 1-2:

Step 3-4:

Step 4(Continued)-5:

Step 5(Continued)-6:

INSPECTION PROCEDURE

CAUTION:
- Before inspecting the high-voltage system or disconnecting the low voltage connector of the inverter with converter assembly, take safety precautions such as wearing insulated gloves and removing the service plug grip to prevent electrical shocks. After removing the service plug grip, put it in your pocket to prevent other technicians from accidentally reconnecting it while you are working on the high-voltage system.
- After disconnecting the service plug grip, wait for at least 10 minutes before touching any of the high-voltage connectors or terminals. After waiting, check the voltage at the inspection point in the inverter with converter assembly. The voltage should be 0 V before beginning work.

HINT: Waiting for at least 10 minutes is required to discharge the high-voltage capacitor inside the inverter with converter assembly.