P3004-133

L110F HYBRID VEHICLE CONTROL: HYBRID CONTROL SYSTEM: P0A1D-390: Hybrid Powertrain Control Module

DTC P0A1D-390 - Hybrid Powertrain Control Module

DTC P3004-133 - Power Cable Malfunction

DESCRIPTION

The hybrid vehicle control ECU monitors its internal operation, it will set DTCs and perform fail-safe control when it detects the following malfunctions.






MONITOR DESCRIPTION

When the hybrid vehicle control ECU detects that the HV battery has been overcharged, the hybrid vehicle control ECU will illuminate the MIL and set a DTC.

MONITOR STRATEGY





TYPICAL ENABLING CONDITIONS





TYPICAL MALFUNCTION THRESHOLDS





COMPONENT OPERATING RANGE





INSPECTION PROCEDURE

PROCEDURE

1. CHECK DTC OUTPUT (HV)
(a) Connect the intelligent tester or Techstream to the DLC3.
(b) Turn the power switch on (IG).
(c) Select the following menu items:
(1) Intelligent tester - Select: DIAGNOSIS / OBD/MOBD / HV ECU / DTC INFO / CURRENT CODES.
(2) Techstream - Select: Powertrain / Hybrid Control / Trouble Codes.
(d) Check if DTCs are output.
Result:






B -- GO TO DTC CHART
A -- REPLACE HYBRID VEHICLE CONTROL ECU