Removal

NAVIGATION: MULTI-DISPLAY (w/ Navigation System): REMOVAL

REMOVAL

1. REMOVE LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY

2. REMOVE BATTERY SERVICE HOLE COVER LH Battery

3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTE: When disconnecting the cable some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

4. REMOVE INSTRUMENT PANEL FINISH PANEL END LH Removal

5. REMOVE INSTRUMENT PANEL FINISH PANEL END RH Removal

6. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY Removal

7. REMOVE NO. 3 BOX PANEL Removal

8. REMOVE REAR UPPER CONSOLE PANEL Removal

9. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY Removal

10. REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET Removal

11. REMOVE MULTI-DISPLAY ASSEMBLY WITH BRACKET





(a) Remove the 2 bolts.






(b) With both hands, pull the bottom part of the display outward slightly.






(c) With your right hand holding the rear side of the display and your left hand holding the left side of the display, pull it outward slightly.






(d) With your left hand holding the rear side of the display and your right hand holding the right side of the display, pull it outward slightly.






(e) Repeat the 2 steps above several times to detach the 6 clips and pull out the display.
(f) Disconnect the connectors and remove the display.






12. REMOVE NO. 2 RADIO BRACKET
(a) Remove the 2 bolts and bracket.






13. REMOVE NO. 1 RADIO BRACKET
(a) Remove the 2 bolts and bracket.