Removal

INTERIOR: REAR CONSOLE BOX (for Ottoman): REMOVAL

REMOVAL





1. REMOVE REAR LOWER SEAT CONSOLE BOX COVER
(a) Using a screwdriver, detach the 4 claws, then detach the 2 hooks and remove the cover.
HINT: Tape the screwdriver tip before use.

2. REMOVE REAR SEAT CONSOLE BOX ASSEMBLY





(a) Using a screwdriver, detach the 4 clips and remove the rear seat front console box panel.
HINT: Tape the screwdriver tip before use.





(b) Remove the 6 bolts, and move the console box in the direction of the arrow shown in the illustration. Then detach the 2 clips, and remove the console box.






(c) Disconnect the connector.






3. REMOVE REAR SEAT CONSOLE ARMREST GARNISH LH
(a) Open the console door.
(b) While pulling up the armrest garnish, detach the 3 claws and 2 clips to remove it.
4. REMOVE REAR SEAT CONSOLE ARMREST GARNISH RH
HINT: Use the same procedures described for the LH side.





5. REMOVE REAR SEAT CONSOLE PANEL ASSEMBLY
(a) Using a screwdriver, detach the 6 clips.
HINT: Tape the screwdriver tip before use.

(b) Disconnect the connector and then remove the console panel.






6. REMOVE REAR POWER SEAT SWITCH
(a) Remove the 4 screws and switch.






7. REMOVE REAR SEAT FRONT CONSOLE TABLE COVER
(a) Using a screwdriver, detach the 2 claws.
HINT: Tape the screwdriver tip before use.

(b) Pull up the table cover and detach the 2 hooks to remove it.






8. REMOVE REAR SEAT CONSOLE TABLE ASSEMBLY
(a) Remove the 2 bolts, 2 nuts and console table.
9. REMOVE VOLTAGE INVERTER ASSEMBLY Removal







10. REMOVE REAR SEAT CONSOLE ARMREST COVER
(a) Take out the console armrest cover.






11. REMOVE REAR SEAT CONSOLE ARMREST ASSEMBLY
(a) Remove the 8 nuts and 2 bolts.
(b) Remove the 2 screws.
(c) Disconnect the connector and then remove the console armrest.