Removal

SEAT: SEAT VIBRATOR MODULE ASSEMBLY (for Ottoman): REMOVAL

REMOVAL

1. REMOVE LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY

2. REMOVE BATTERY SERVICE HOLE COVER LH Battery

3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
- After the power switch is turned OFF, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the power switch OFF, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

4. REMOVE BATTERY SERVICE HOLE COVER

5. REMOVE ROPE HOOK

6. REMOVE ROPE HOOK ASSEMBLY

7. REMOVE DECK TRIM SIDE BOARD RH

8. REMOVE NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY

9. REMOVE NO. 1 COOLER COVER (w/ Rear Cooler) Removal

10. REMOVE FRONT LUGGAGE COMPARTMENT TRIM COVER

11. REMOVE REAR FLOOR FINISH PLATE

12. REMOVE LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY LH







13. REMOVE SEAT VIBRATOR MODULE ASSEMBLY
(a) Detach the 2 claws and disconnect the air hose connector.
(b) Detach the wire harness clamp.
(c) Disconnect the connector.
(d) Remove the 3 bolts and the module.