Removal

AUDIO / VISUAL: STEERING PAD SWITCH: REMOVAL

REMOVAL

1. REMOVE LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY

2. REMOVE BATTERY SERVICE HOLE COVER LH Battery

3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
NOTICE:
- After the power switch is turned OFF, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the power switch OFF, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.
- When disconnecting the cable some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

4. REMOVE SWITCH AND VOLUME CASE Removal

5. REMOVE NO. 2 STEERING WHEEL COVER LOWER Removal

6. REMOVE STEERING PAD Removal







7. REMOVE STEERING PAD SWITCH ASSEMBLY
(a) Disconnect the connector.
(b) Remove the 4 screws and steering pad switch.