Compressor/Pump: Testing and Inspection

SUSPENSION CONTROL: HEIGHT CONTROL COMPRESSOR: INSPECTION

INSPECTION

1. INSPECT HEIGHT CONTROL COMPRESSOR (EXHAUST VALVE)






(a) Measure the resistance of the exhaust valve.
(1) Measure the resistance according to the value(s) in the table below.
Standard resistance:






If the result is not as specified, replace the height control compressor.






(b) Check the exhaust valve operation.
(1) Apply battery voltage to the exhaust valve and check the operating sound of the height control valve.
OK:






If the result is not as specified, replace the height control compressor.
2. INSPECT HEIGHT CONTROL COMPRESSOR (COMPRESSOR MOTOR)






(a) Check the compressor operation.
(1) Apply battery voltage to the compressor motor and check the operation of the height control compressor.
OK:





NOTICE:
- Do not operate the height control compressor for 60 seconds or more.
- Since a short and a lock-up inside the height control compressor cause excessive current to flow, stop operation immediately when the compressor motor does not operate.

If the result is not as specified, replace the height control compressor.