Active Stabilizer Suspension System

SUSPENSION CONTROL: ACTIVE STABILIZER SUSPENSION SYSTEM: OPERATION CHECK

OPERATION CHECK

1. FRONT ACTIVE STABILIZER CONTROL ACTUATOR FUNCTION INSPECTION
(a) Turn the power switch OFF.
(b) Connect the intelligent tester or Techstream to the DLC3.
(c) Turn the power switch ON (READY) and the tester ON.
(d) Follow the tester screen's display and perform the front active stabilizer Active Test.
HINT: If the Active Test cannot be performed, check for DTCs Active Stabilizer Suspension System. If test mode DTC C194F and/or C1950 are output, refer to the appropriate flowchart C194F.

(e) During the Active Test, check that the front active stabilizer operates.
NOTE: During the Active Test, do not drive the vehicle.
(1) Intelligent tester

F STABILIZER





(2) Techstream

Front Stabilizer





OK:
Front active stabilizer operates
2. REAR ACTIVE STABILIZER CONTROL ACTUATOR FUNCTION INSPECTION
(a) Turn the power switch OFF.
(b) Connect the intelligent tester or Techstream to the DLC3.
(c) Turn the power switch ON (READY) and the tester ON.
(d) Follow the tester screen's display and perform the rear active stabilizer Active Test.
HINT: If the Active Test cannot be performed, check for DTCs Active Stabilizer Suspension System. If test mode DTC C194F and/or C1951 are output, refer to the appropriate flowchart C194F.

(e) During the Active Test, check that the rear active stabilizer operates.
NOTE: During the Active Test, do not drive the vehicle.
(1) Intelligent tester

R STABILIZER





(2) Techstream

Rear Stabilizer





OK:
Rear active stabilizer operates