Removal

2GR-FE IGNITION: IGNITION COIL:

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE COOL AIR INTAKE DUCT SEAL Removal
3. REMOVE ENGINE ROOM SIDE COVER LH Removal
4. REMOVE ENGINE ROOM SIDE COVER RH Removal
5. REMOVE FRONT SUSPENSION UPPER CENTER BRACE Removal
6. REMOVE V-BANK COVER SUB-ASSEMBLY Removal
7. DRAIN ENGINE COOLANT Testing and Inspection
8. REMOVE AIR CLEANER CAP SUB-ASSEMBLY Removal
9. REMOVE INTAKE AIR SURGE TANK ASSEMBLY Removal
10. REMOVE NO. 1 SURGE TANK STAY





(a) Remove the bolt and disconnect the harness clamp.





(b) Remove the bolt and No. 1 surge tank stay.
11. REMOVE IGNITION COIL ASSEMBLY





(a) Disconnect the 6 ignition coil connectors.
(b) Remove the 6 bolts and 6 ignition coils.