Installation

INTERIOR: REAR SUNSHADE ASSEMBLY:

INSTALLATION

1. INSTALL REAR SUNSHADE RELAY
NOTE:
When reassembling the rear sunshade assembly, eliminate static electricity by touching the vehicle body to prevent the components from being damaged.





(a) Install the rear sunshade relay with the 2 screws.
(b) Connect the connector.





(c) Engage the 4 claws and install the rear sunshade relay cover.
(d) Install the screw.
2. INSTALL REAR WINDOW SHADE ASSEMBLY





(a) Install the rear window shade assembly, and temporarily tighten the 4 bolts [A] and bolt [B].
(b) Fully tighten the 5 bolts.
(c) Connect the connector.
3. INSTALL NO. 2 PACKAGE TRAY TRIM PANEL ASSEMBLY





(a) Engage the 6 claws and 3 clips, and install the No. 2 package tray trim panel assembly.
4. INSTALL CENTER STOP LIGHT SET Installation
5. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY





(a) Thread the 3 rear seat belt floor anchors into the package tray trim panel assembly.
(b) Insert the rear end of the package tray trim panel assembly into the rear window shade assembly.
(c) Engage the 2 clips and install the package tray trim panel assembly.
6. INSTALL REAR SEAT SHOULDER BELT HOLE COVER Installation
7. CONNECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY RH Installation
8. CONNECT REAR SEAT 3 POINT TYPE BELT ASSEMBLY LH Installation
9. CONNECT REAR SEAT 3 POINT TYPE BELT ASSEMBLY RH Installation
10. INSTALL ROOF SIDE INNER GARNISH ASSEMBLY LH Installation
11. INSTALL ROOF SIDE INNER GARNISH ASSEMBLY RH Installation
12. INSTALL REAR SEAT SIDE GARNISH LH (w/o Rear Seat Side Airbag) Installation
13. INSTALL REAR SEAT SIDE AIRBAG ASSEMBLY LH (w/ Rear Seat Side Airbag) Installation
14. INSTALL REAR SEAT SIDE GARNISH RH (w/o Rear Seat Side Airbag) Installation
15. INSTALL REAR SEAT SIDE AIRBAG ASSEMBLY RH (w/ Rear Seat Side Airbag)
HINT: Use the same procedure for the LH side and RH side.

16. INSTALL REAR DOOR SCUFF PLATE LH Installation
17. INSTALL REAR DOOR SCUFF PLATE RH Installation
18. INSTALL REAR SEATBACK ASSEMBLY Installation
19. INSTALL REAR CENTER SEAT HEADREST ASSEMBLY
20. INSTALL REAR SEAT HEADREST ASSEMBLY
21. INSTALL REAR SEAT CUSHION ASSEMBLY Installation
22. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (w/ Rear Seat Side Airbag)
23. PERFORM INITIALIZATION (w/ Rear Seat Side Airbag)
NOTE:
Some systems need initialization after reconnecting the cable to the negative battery terminal Repair Instruction - Initialization.

24. INSPECT SRS WARNING LIGHT (w/ Rear Seat Side Airbag) Diagnosis System