B1472

AIR CONDITIONING: AIR CONDITIONING SYSTEM: B1472/72: A/C Inverter High Voltage Output System Malfunction

DTC B1472/72 - A/C Inverter High Voltage Output System Malfunction

DESCRIPTION

The inverter in the compressor assembly outputs high-voltage to operate the motor. If there is an open or short in the output circuit, the ECU will stop compressor operation and output the DTC. The output DTC will be memorized as a past DTC. The compressor operation remains stopped until both the past and present DTCs are cleared. When a DTC is output even once, replace the compressor assembly.
CAUTION:
- Wear electrically insulated gloves and pull out the service plug grip before inspection as procedures may require disconnecting high-voltage connector. Be sure to carry the removed service plug grip because other workers may install it by mistake.
- Do not touch the high-voltage connectors or terminals for 10 minutes after the service plug grip is removed.
NOTICE:
This circuit uses both CAN and multiplex communication. Before performing the inspection, check that the CAN and multiplex communication systems are functioning normally.





INSPECTION PROCEDURE

PROCEDURE

1. REPLACE COMPRESSOR ASSEMBLY
NEXT -- END