B2058

PRE-COLLISION: PRE-COLLISION SYSTEM: B2058: Steering Angle Sensor

DTC B2058 - Steering Angle Sensor

DESCRIPTION

This DTC is output when a malfunction in the steering angle sensor is detected. This circuit consists of the steering angle sensor and seat belt control ECU. Signals are sent from the steering angle sensor through CAN communication.






INSPECTION PROCEDURE
NOTICE:
When the seat belt control ECU is replaced with a new one, Active Test must be performed Pre-Collision System.

PROCEDURE

1. CHECK FOR DTC
(a) Delete the DTC Pre-Collision System.
(b) Recheck for DTC.

Result:





C -- REPLACE SEAT BELT CONTROL ECU
B -- GO TO CAN COMMUNICATION SYSTEM
A -- END